IOM Ultra

(1 customer review)

449.00540.00 ex. VAT

— OUT OF STOCK, NEW BATCH MID MARCH —

A compact stereo amplifier using Hypex, N-Core Class D amplification.

Description

We like the Wiim® Ultra. That much that we think it deserves a matching amplifier so we designed one with the same dimensions: the IOM Ultra.

High-end audio quality is guaranteed by using a premium Hypex, NCore® driven amplifier; the NC252MP (250W stereo in 4 ohm). Available in a black anodized aluminum housing with a SpaceGrey top/bottom cover and in a black housing with Silver top/bottom cover to match your Wiim® Ultra. You choose.

The compact chassis is made off 5mm & 6mm thick full aluminum sheets with the same outer dimension as the Wiim® Ultra. For easy on/off control there is a trigger input on the backside (cable included) for receiving the trigger signal.  The Wiim® Ultra has this standard on-board so when you turn on your Wiim® Ultra your IOM Ultra amp will follow. As easy as that. There is no on/off button to get a minimalistic & clean design.

We offer IOM Ultra in two power versions: 125W stereo and 250W stereo. The exact specification of the applied boards can be found in the ‘additional information’ tab.

Both power & color versions can be purchased with RCA input sockets only or with as well RCA as XLR input sockets (both). The last execution has high-end bindings posts.

HIGHLIGHTS of the applied boards:

  • High efficiency
  • Universal mains operation
  • Flat, fully load-independent frequency response
  • Low output impedance
  • Very low, frequency-independent THD
  • Very low noise

Audiophonics MPA-S250NC RCA Amplificateur Stéréo Class D NCore 2x250W 4 Ohm

  • This product is made/assembled & shipped within 1 week after ordering. Pls. send an email when you need it faster.
  • Price is displayed without VAT/BTW. If applicable this will be added at checkout.

Additional information

Weight 2.600 kg
Dimensions 20 × 20 × 7.4 cm
Amplifier module

125W stereo, 250W stereo

color:

SpaceGrey, Silver

Input

unbalanced only (RCA), double inputs (RCA & XLR)

Output power

125W stereo:
Output Power (2Ω): 2 x 115W, (BTL 2Ω is not supported)
Output Power (4Ω): 2 x 125W, (1 x 200W in BTL)
Output Power (8Ω): 2 x 75W (1 x 250W in BTL)
Channels: 2
Distortion: 0.0014% 20hZ < f < 20kHz. Pout = 1W
Output Noise: 40 µV
Power bandwidth: 20Hz – 35kHz
Freuquency Response: 10Hz – 48kHz +0/-3dB. All loads
Idle Power: 7.5W
Output impedance: 2mΩ (Max) – f < 1kHz, 3.5mΩ (Max) – f < 20kHz
Automatic input voltage selection: Yes
Mains voltage input: 230V / 115V
Technology: NCORE®
Family: Mains Powered NCORE® Family
————————————————————————————————————
250W stereo:
Output Power (2Ω): 2 x 180W, (BTL 2Ω is not supported)
Output Power (4Ω): 2 x 250W, (1 x 400W in BTL)
Output Power (8Ω): 2 x 150W, (1 x 500W in BTL)
Channels: 2
Output impedance: 2.5mΩ (Max) – f < 1kHz, 5mΩ (Max) – f < 20kHz
Automatic input voltage selection: Yes
Mains voltage input: 230V / 115V
Technology: NCORE®
Family: Mains Powered NCORE® Family

Standby power

<1W

On power

8,5W (power-on, no audio)

Trigger input

5 -12V DC activated

Mains voltage

230V/115V auto switching

Contents

1 x IOM Ultra
1 x Mains powercable (EU)
1 x trigger cable 20cm

1 review for IOM Ultra

  1. Brendan

    Ultra WiiM Power Amplifier Well, I am glad I did the research beforehand on purchasing this item that listens to music in many ways, like listening to Jean Micheal Jarren and Oxygen. It is very in-depth to listen to the album that is very pleasing.
    What can we improve on going forward? We need to look at the amplifier to have power on the front instead of the back, and some instructions would be good going forward.

    Other options for additional equipment are to be adding to amp going forward, but overall, a job well done that I appreciate all the help on this purchasing and good luck going forward as I think you bloody crack job it on this design so far.

Add a review

Your email address will not be published. Required fields are marked *